Have any questions? swcetl5@yahoo.com 040-23305552

Acadamic Regulation

SHADAN WOMEN'S COLLEGE OF ENGINEERING & TECHNOLOGY

(Affiliated to Jawaharlal Nehru Technological University)

Khairatabad,6-2-980, Raj Bhavan Rd, Taj Enclave, Hyderabad –

B.Tech, (Regular) Four Year Degree (Revised) Academic Regulations

( Effective for the students studying I year from the Academic Year 2002 – 2003 and onwards )

    Award of B.Tech. Degree:
    A Student will be declared eligible for the award of the B.Tech, Degree if he fulfills the following academic regulations: He has pursued a course of study for not less than four academic years and not more then eight academic years. He has registered for and studied all the subjects for a total of 212 credits and secured all the 212 credits. Students, who fail to fulfill all the academic requirements for the award of the degree with in eight academic years from the year of their admission, shall forfeit their seat in the course and their seat shall stand cancelled.
    Course of Study
    The following courses of study are offered at the present for specialization for the B.Tech Degree.
    Electrical and Electronics Engineering.
    Electronics and Communication Engineering.
    Computer Science and Engineering.
    Information Technology.

    Evaluation - Distribution and Weightage of marks
    I The performance of a student in every subject/course (including practicals and UG major project) will be evaluated for 100 marks each, with 25 marks allotted for CIE (Continuous Internal Evaluation) and 75 marks for SEE (Semester End-Examination)
    II For theory subjects, during a semester, there shall be two mid-term examinations. Each mid-term examination consists of one objective paper, one descriptive paper and one assignment. The objective paper and the descriptive paper shall be for 10 marks each with a total duration of 1 hour 20 minutes (20 minutes for objective and 60 minutes for descriptive paper). The objective paper is set with 20 bits of multiple choice, fill-in the blanks and matching type of questions for a total of 10 marks. The descriptive paper shall contain 4 full questions out of which, the student has to answer 2 questions, each carrying 5 marks. While the first mid-term examination shall be conducted on 50% of the syllabus, the second mid-term examination shall be conducted on the remaining 50% of the syllabus. Five marks are allocated for assignments (as specified by the subject teacher concerned). The first assignment should be submitted before the conduct of the first midexamination, a nd the second assignment should be submitted before the conduct of the second mid-examination. The total marks secured by the student in each mid-term examination are evaluated for 25 marks, and the average of the two mid-term examinations shall be taken as the final marks secured by each student in internals/sessionals. If any student is absent from any subject of a mid-term examination, an on-line test will be conducted for him by the university. The details of the question paper pattern are as follows,
    The end semester examinations will be conducted for 75 marks consisting of two parts viz. i) Part- A for 25 marks, ii) Part - B for 50 marks.
    Part-A is compulsory question which consists of ten sub-questions. The first five sub-questions are from each unit and carry 2 marks each. The next five subquestions are one from each unit and carry 3 marks each.
    Part-B consists of five questions (numbered from 2 to 6) carrying 10 marks each. Each of these questions is from one unit and may contain sub-questions. For each question there will be an “either” “or” choice, which means that there will be two questions from each unit and the student should answer either of the two questions
    III For practical subjects there shall be a continuous internal evaluation during the semester for 25 sessional marks and 75 semester end examination marks. Out of the 25 marks for internal evaluation, day-to-day work in the laboratory shall be evaluated for 15 marks and internal practical examination shall be evaluated for 10 marks conducted by the laboratory teacher concerned. The semester end examination shall be conducted with an external examiner and the laboratory teacher. The external examiner shall be appointed from the clusters of colleges which are decided by the examination branch of the university.
    IV For the subject having design and/or drawing, (such as engineering graphics, engineering drawing, machine drawing) and estimation, the distribution shall be 25 marks for continuous internal evaluation (15 marks for day-to-day work and 10 marks for internal tests) and 75 marks for semester end examination. There shall be two internal tests in a semester and the average of the two shall be considered for the award of marks for internal tests.
    V There shall be an UG mini-project, in collaboration with an industry of their specialization. Students will register for this immediately after III year II semester examinations and pursue it during summer vacation. The UG mini-project shall be submitted in a report form and presented before the committee in IV year I semester. It shall be evaluated for 100 marks. The committee consists of an external examiner, Head of the Department, supervisor of the UG mini-project and a senior faculty member of the department. There shall be no internal marks for UG mini-project.
    VI There shall be a seminar presentation in IV year I semester. For the seminar, the student shall collect the information on a specialized topic, prepare a technical report, and submit it to the department. It shall be evaluated by the departmental committee consisting of Head of the Department, seminar supervisor and a senior faculty member. The seminar report shall be evaluated for 100 marks. There shall be no semester end examination for the seminar.
    VII Out of a total of 100 marks for the UG major Project, 25 marks shall be allotted for internal evaluation and 75 marks for the end semester examination (viva voce). The end semester examination of the UG major Project shall be conducted by the same committee as appointed for the UG mini-project. In addition, the UG major Project supervisor shall also be included in the committee. The topics for UG mini project, seminar and UG major Project shall be different from one another. The evaluation of UG major Project shall be made at the end of IV year II semester. The internal evaluation shall be on the basis of two seminars given by each student on the topic of UG major Project.
    VIII The laboratory marks and the sessional marks awarded by the college are subject to scrutiny and scaling by the university wherever necessary. In such cases, the sessional and laboratory marks awarded by the college will be referred to a committee. The committee will arrive at a scaling factor and the marks will be scaled accordingly. The recommendations of the committee are final and binding. The laboratory records and internal test papers shall be preserved in the respective institutions as per the university rules and produced before the committees of the university as and when asked for.
    IX For mandatory courses Environmental Science, Professional Ethics and gender sensitization lab, a student has to secure 40 marks out of 100 marks (i.e. 40% of the marks allotted) in the continuous internal evaluation for passing the subject/course.
    X For mandatory courses NCC/ NSO and NSS, a ‘satisfactory participation certificate’ shall be issued to the student from the authorities concerned, only after securing 65% attendance in such a course.
    XI No marks or letter grade shall be allotted for all mandatory/non-credit courses.

    First Class With Distinction

    70% and above

     

    First Class

    Below 70% but not less than 60%

    From the aggregate marks secured for 212 credits.

    Second Class

    Below 60% but not less than 50%

     

    Pass Class

    Below 50% but not less than 40%

     
    Academic Regulations for B.Tech. (Lateral Entry Scheme)
    I The LES students after securing admission shall pursue a course of study for not less than three academic years and not more than six academic years.
    II The student shall register for 144 credits and secure 144 credits with CGPA ≥ 5 from II year to IV year B.Tech. programme (LES) for the award of B.Tech. degree. Out of the 144 credits secured, the student can avail exemption up to 6 credits, that is, one open elective subject and one professional elective subject or two professional elective subjects resulting in 138 credits for B.Tech programme performance evaluation.
    III The students, who fail to fulfil the requirement for the award of the degree in six academic years from the year of admission, shall forfeit their seat in B.Tech. IV The attendance requirements of B. Tech. (Regular) shall be applicable to B.Tech. (LES).

    First Class With Distinction

    70% and above

     

    First Class

    Below 70% but not less than 60%

    From the aggregate marks secured for 156 Credits.

    Second Class

    Below 60% but not less than 50%

    (i.e. II year to IV year)

    Pass Class

    Below 50% but not less than 40%

     

    (The marks in the internal evaluation and end examination shall be shown separately in the

    marks memorandum)

    1. All the regulations as applicable for B.Tech Four-Year degree course (Regular)

    Will hold good for B.Tech. (LES)